How To Activate Bloodflame Blade Elden Ring?

How to Activate Bloodflame Blade in Elden Ring

Bloodflame Blade is a powerful weapon art in Elden Ring that can be used to imbue your weapon with the power of fire. It can be a great way to deal extra damage to enemies, and it can also be used to apply status effects such as Bleed. In this guide, we will show you how to activate Bloodflame Blade so that you can use it to your advantage.

Prerequisites

Before you can use Bloodflame Blade, you will need to meet the following requirements:

  • You must have the Bloodflame Blade incantation. This can be found by defeating the Bloodhound Knight Darriwil in Limgrave.
  • You must have at least 12 Faith.
  • You must have a weapon that can be infused with Ashes of War.

Activating Bloodflame Blade

Once you have met the prerequisites, you can activate Bloodflame Blade by following these steps:

1. Equip the Bloodflame Blade incantation in your left hand.
2. Hold down the L1 button (or LB on Xbox) to enter two-hand mode.
3. Press the R1 button (or RB on Xbox) to use the Bloodflame Blade incantation.

Your weapon will now be imbued with the power of fire. You can use this to deal extra damage to enemies, and you can also apply status effects such as Bleed.

Tips for Using Bloodflame Blade

Here are a few tips for using Bloodflame Blade effectively:

  • Use it against enemies that are weak to fire.
  • Use it to apply status effects such as Bleed.
  • Use it to finish off enemies that are low on health.
  • Be careful not to overuse Bloodflame Blade, as it can quickly drain your FP.

With a little practice, you can use Bloodflame Blade to become a powerful force in Elden Ring.

| Step | Description | Example |
|—|—|—|
| 1. Equip the Bloodflame Blade incantation. | The Bloodflame Blade incantation is a weapon art that can be found in the Caelid region. It can be purchased from Gurranq, the Beast Clergyman, for 1,000 Runes. | ![Bloodflame Blade incantation](https://i.imgur.com/88oH03a.png) |
| 2. Hold down the weapon art button while wielding a melee weapon. | The weapon art button is typically the L2 button on PlayStation controllers and the LT button on Xbox controllers. | ![Holding down the weapon art button](https://i.imgur.com/o32X435.png) |
| 3. Release the weapon art button to activate the Bloodflame Blade. | The Bloodflame Blade will coat your weapon in a fiery aura, dealing additional fire damage to enemies. | ![The Bloodflame Blade in action](https://i.imgur.com/578X8zS.png) |

The Bloodflame Blade is an Ash of War in Elden Ring that can be applied to weapons to imbue them with the power of fire. When activated, the Bloodflame Blade will coat the weapon in a fiery aura that deals additional fire damage to enemies. The Bloodflame Blade can also be used to perform a special attack that unleashes a wave of fire.

In order to use the Bloodflame Blade, you must first meet the following prerequisites:

  • Must have the Bloodflame Blade in your inventory. The Bloodflame Blade can be found in the Caelid region, near the Minor Erdtree.
  • Must have the required stats to wield the Bloodflame Blade. The Bloodflame Blade requires 18 Strength and 18 Dexterity to wield.
  • Must be in a location where you can use Ashes of War. Ashes of War can be used at any Site of Grace.

Equipping the Bloodflame Blade

To equip the Bloodflame Blade, follow these steps:

1. Open your inventory.
2. Select the “Ashes of War” tab.
3. Select the Bloodflame Blade.
4. Select the weapon you want to apply the Bloodflame Blade to.
5. Press “Equip.”

The Bloodflame Blade will now be equipped to the selected weapon.

Using the Bloodflame Blade

To use the Bloodflame Blade, you must first activate it. To do this, press the “L1” button while holding the weapon in your left hand. The Bloodflame Blade will then be activated and will remain active for a short period of time.

While the Bloodflame Blade is active, your weapon will deal additional fire damage to enemies. You can also perform a special attack by pressing the “R2” button. This attack will unleash a wave of fire that damages enemies in front of you.

The Bloodflame Blade is a powerful weapon that can be used to deal devastating damage to enemies. However, it is important to note that the Bloodflame Blade also consumes FP when it is active. Therefore, you should use it wisely.

The Bloodflame Blade is a powerful Ash of War that can be used to add fire damage to your weapons. It is a great choice for players who want to deal massive damage to their enemies.

How To Activate Bloodflame Blade Elden Ring?

Bloodflame Blade is a powerful incantation in Elden Ring that can be used to buff your weapon with fire damage. To activate Bloodflame Blade, you will need to:

1. Find the Bloodflame Blade incantation.
2. Equip the Bloodflame Blade incantation.
3. Open your inventory.
4. Select the Bloodflame Blade.
5. Press the “Activate” button.

Once you have activated Bloodflame Blade, your weapon will be buffed with fire damage for a short period of time. This buff can be stacked with other buffs, such as Flame Grant Me Strength, to increase the damage of your weapon even further.

Find the Bloodflame Blade incantation

The Bloodflame Blade incantation can be found in the Caelid region of Elden Ring. To reach Caelid, you will need to travel to the southern part of Limgrave and cross the bridge to the east. Once you reach Caelid, head to the northern part of the region and find the Sellia Crystal Tunnel.

The Sellia Crystal Tunnel is a dungeon located in the northern part of Caelid. To enter the dungeon, you will need to find the Sellia Crystal Tunnel key. The key can be found in a chest in the southern part of the dungeon.

Once you have the key, head to the entrance of the dungeon and use it to open the door. Inside the dungeon, you will find a number of enemies, including crystal golems and crystal butterflies. Make your way through the dungeon until you reach the boss room.

The boss of the Sellia Crystal Tunnel is a crystalian. The crystalian is a large, crystal-covered enemy that can be difficult to defeat. To defeat the crystalian, you will need to use fire damage. Once you have defeated the crystalian, you will be able to loot the Bloodflame Blade incantation from its corpse.

Equip the Bloodflame Blade incantation

Once you have found the Bloodflame Blade incantation, you will need to equip it in your inventory. To do this, open your inventory and select the “Equip” tab. Scroll down until you find the Bloodflame Blade incantation and select it. The Bloodflame Blade incantation will now be equipped in your right hand.

Open your inventory

To open your inventory, press the “Y” button on your controller. This will open the inventory menu.

Select the Bloodflame Blade

To select the Bloodflame Blade, use the left stick to scroll over to the “Weapons” tab and then use the right stick to scroll down until you find the Bloodflame Blade. Once you have found the Bloodflame Blade, press the “A” button to select it.

Press the “Activate” button

To activate the Bloodflame Blade, press the “L1” button on your controller. This will cause the Bloodflame Blade to buff your weapon with fire damage. The buff will last for a short period of time.

Bloodflame Blade is a powerful incantation that can be used to buff your weapon with fire damage. To activate Bloodflame Blade, you will need to find the incantation, equip it in your inventory, and then press the “Activate” button. The buff will last for a short period of time, so make sure to use it wisely.

How To Activate Bloodflame Blade Elden Ring?

Question: How do I activate Bloodflame Blade in Elden Ring?

Answer: To activate Bloodflame Blade, you will need to find the Bloodflame Blade incantation. This can be found in the Caelid region, near the Minor Erdtree. Once you have the incantation, you can cast it by equipping it in your left hand and using the L1 button. This will coat your weapon in a bloody aura, dealing additional fire damage to enemies.

Question: What does Bloodflame Blade do?

Answer: Bloodflame Blade is a powerful incantation that coats your weapon in a bloody aura, dealing additional fire damage to enemies. This damage scales with your Faith stat. Additionally, the incantation can be used to apply the Bloodflame status effect to enemies, which causes them to bleed.

Question: How do I upgrade Bloodflame Blade?

Answer: To upgrade Bloodflame Blade, you will need to find the Smithing Stones. These can be found throughout the world of Elden Ring, or purchased from merchants. Once you have the Smithing Stones, you can take them to a blacksmith and upgrade Bloodflame Blade. Each upgrade will increase the damage and the duration of the incantation.

Question: What are the best weapons to use with Bloodflame Blade?

Answer: The best weapons to use with Bloodflame Blade are those that have a high attack speed. This is because the incantation’s damage is based on the number of hits you land. Some good weapons to use with Bloodflame Blade include the Bloodhound’s Fang, the Twinblade, and the Greatsword.

Question: What are the best talismans to use with Bloodflame Blade?

Answer: The best talismans to use with Bloodflame Blade are those that increase your damage output or your survivability. Some good talismans to consider include the Radagon Icon, the Claw Talisman, and the Erdtree’s Favor.

Question: What are the best strategies for using Bloodflame Blade?

Answer: There are a few different strategies you can use with Bloodflame Blade. One strategy is to use it as a finishing move on enemies that are already low on health. This will allow you to quickly take them out. Another strategy is to use it to apply the Bloodflame status effect to enemies. This will make them bleed, which will deal damage over time. Finally, you can also use Bloodflame Blade to buff your allies. This will increase their damage output and make them more effective in battle.

Bloodflame Blade is a powerful weapon art in Elden Ring that can be used to deal fire damage and inflict the Bloodflame status effect. It is a great choice for players who want to add some fire damage to their melee attacks, or for those who want to build a bleed-focused character. To activate Bloodflame Blade, players need to equip the Bloodflame Blade incantation and then use it while wielding a melee weapon. The Bloodflame Blade will then be activated and will remain active for a short period of time. During this time, players will deal fire damage with their melee attacks and will have a chance to inflict the Bloodflame status effect on enemies.

Bloodflame Blade is a versatile weapon art that can be used in a variety of situations. It can be used to deal with enemies that are resistant to physical damage, or to quickly build up the Bloodflame status effect. It can also be used to finish off enemies that are already low on health.

If you are looking for a powerful weapon art that can be used to deal fire damage and inflict the Bloodflame status effect, then Bloodflame Blade is a great option. It is easy to use and can be a valuable asset in any build.

Author Profile

Design By Typing
Design By Typing
We’ve turned typing into an art form. We don’t just scratch the surface; we type through it, breaking the crust of the conventional and bringing to light the layers of knowledge beneath. Our words are our paint, our keyboards the canvas, and the result? A masterpiece of information that’s as accurate as it is compelling.

We’re a band of inquisitive souls, data detectives, and prose pros. We’re not your average joe with a search engine. We dig deeper, leap further, and stay up way too late for the sake of quenching the knowledge thirst. Our team is a motley crew of expert researchers, savvy writers, and passionate nerds who believe that the right answer isn’t always the first one Google spits out.

Similar Posts