How To Change Battery In Chrysler Key Fob?

How to Change the Battery in a Chrysler Key Fob

Your Chrysler key fob is an essential part of your car, allowing you to lock and unlock the doors, open the trunk, and start the engine. But what happens when the battery dies? Don’t worry, changing the battery in a Chrysler key fob is a quick and easy process.

In this article, we’ll walk you through the steps of changing the battery in your Chrysler key fob, so you can be back on the road in no time.

We’ll cover everything you need to know, from finding the right battery to removing the old battery and installing the new one. So whether you’re a complete novice or you’re just looking for a refresher, read on for all the information you need to know.

Step Instructions Image
1 Remove the physical key from the key fob.
2 Use a small flathead screwdriver to pry open the back cover of the key fob.
3 Remove the old battery and replace it with a new one.
4 Reattach the back cover of the key fob.

How To Change Battery In Chrysler Key Fob?

This guide will show you how to change the battery in a Chrysler key fob. The process is simple and can be completed in a few minutes.

Tools and Materials Needed

  • Replacement battery (CR2032)
  • Small flathead screwdriver

Steps to Change the Battery

1. Locate the battery compartment on the back of the key fob. It is usually a small, rectangular door that is held in place by a small screw.
2. Use the flathead screwdriver to remove the screw and open the battery compartment.
3. Remove the old battery and insert the new battery, making sure that the positive side is facing up.
4. Close the battery compartment and replace the screw.

The battery in your Chrysler key fob should now be replaced.

Changing the battery in your Chrysler key fob is a simple task that can be completed in a few minutes. By following the steps in this guide, you can keep your key fob working properly and avoid being locked out of your car.

Here are some additional tips for changing the battery in your Chrysler key fob:

  • Make sure that you purchase the correct replacement battery. The battery in your key fob is a CR2032 battery.
  • Be careful not to damage the key fob when you are removing the old battery or inserting the new battery.
  • If you are having trouble changing the battery, you can take your key fob to a dealership or a locksmith.

By following these tips, you can easily change the battery in your Chrysler key fob and keep your car running smoothly.

How To Change Battery In Chrysler Key Fob?

This guide will show you how to change the battery in a Chrysler key fob. The process is simple and only takes a few minutes.

What You Will Need

  • A small Phillips head screwdriver
  • A new CR2032 battery

Step 1: Remove the Physical Key from the Key Fob

1. Locate the small button on the back of the key fob.
2. Press the button and gently pry the physical key out of the key fob.

Step 2: Locate the Battery Compartment on the Back of the Key Fob

1. There is a small slot on the back of the key fob.
2. Insert the Phillips head screwdriver into the slot and gently pry open the battery compartment.

Step 3: Remove the Old Battery

1. The old battery will be a small, round, flat battery.
2. Gently pry the old battery out of the battery compartment.

Step 4: Insert the New Battery

1. Make sure that the positive side of the battery is facing up.
2. Insert the new battery into the battery compartment.

Step 5: Close the Battery Compartment

1. Press down on the battery compartment until it snaps shut.
2. Insert the physical key back into the key fob.

That’s it! You have now successfully changed the battery in your Chrysler key fob.

Here are a few additional tips:

  • If you are having trouble removing the physical key from the key fob, you can try using a pair of tweezers.
  • If you are having trouble inserting the new battery into the battery compartment, you can try using a small piece of tape to hold it in place.
  • If you are not sure which side of the battery is the positive side, you can look for a small plus sign (+) on the battery.

By following these steps, you can easily change the battery in your Chrysler key fob and keep your car running smoothly.

How to Change Battery in Chrysler Key Fob

Q: What type of battery does a Chrysler key fob use?
A: Chrysler key fobs use a 2025 lithium coin battery.

Q: How long does a Chrysler key fob battery last?
A: A Chrysler key fob battery typically lasts for 1-2 years.

Q: How do I know if my Chrysler key fob battery is dead?
A: There are a few ways to tell if your Chrysler key fob battery is dead.

  • The key fob may not work to unlock or lock your car.
  • The key fob may not work to start your car.
  • The key fob’s lights may not turn on when you press a button.

Q: How do I change the battery in my Chrysler key fob?
A: To change the battery in your Chrysler key fob, follow these steps:

1. Remove the physical key from the key fob.
2. Locate the battery compartment on the back of the key fob.
3. Use a small coin to pry open the battery compartment.
4. Remove the old battery and replace it with a new one.
5. Close the battery compartment.
6. Insert the physical key back into the key fob.

Q: What if I have trouble changing the battery in my Chrysler key fob?
A: If you have trouble changing the battery in your Chrysler key fob, you can take it to a dealership or a locksmith. They will be able to change the battery for you.

Changing the battery in a Chrysler key fob is a simple task that can be completed in a few minutes. By following the steps outlined in this guide, you can ensure that your key fob is always working properly.

Here are the key takeaways from this article:

  • The battery in a Chrysler key fob is a small, round, button cell battery.
  • The battery is located in the back of the key fob.
  • To replace the battery, you will need to pry open the back cover of the key fob.
  • Once the back cover is removed, you can insert the new battery and replace the back cover.
  • It is important to use the correct type of battery for your key fob.
  • By following these steps, you can easily change the battery in your Chrysler key fob and keep your car’s keyless entry system working properly.

Author Profile

Design By Typing
Design By Typing
We’ve turned typing into an art form. We don’t just scratch the surface; we type through it, breaking the crust of the conventional and bringing to light the layers of knowledge beneath. Our words are our paint, our keyboards the canvas, and the result? A masterpiece of information that’s as accurate as it is compelling.

We’re a band of inquisitive souls, data detectives, and prose pros. We’re not your average joe with a search engine. We dig deeper, leap further, and stay up way too late for the sake of quenching the knowledge thirst. Our team is a motley crew of expert researchers, savvy writers, and passionate nerds who believe that the right answer isn’t always the first one Google spits out.

Similar Posts