How To Change The Battery On Kwikset Smart Lock?

How to Change the Battery on a Kwikset Smart Lock

Your Kwikset Smart Lock is a convenient and secure way to keep your home safe. But what happens when the battery dies? Don’t worry, changing the battery is a quick and easy process. In this article, we’ll walk you through the steps, so you can be back to enjoying your smart lock in no time.

We’ll start by explaining where the battery is located on your lock. Then, we’ll show you how to remove the old battery and install a new one. Finally, we’ll provide some tips for keeping your smart lock battery in good condition.

So, if your Kwikset Smart Lock is running low on battery, read on to learn how to change it!

Step Instructions Image
1 Remove the cover from the lock.
2 Remove the old batteries.
3 Insert the new batteries.
4 Replace the cover.

What You Need

To change the battery on your Kwikset Smart Lock, you will need the following:

  • A Kwikset Smart Lock
  • A Phillips head screwdriver
  • Replacement batteries

How to Change the Battery

1. Turn off the power to the lock. This can be done by turning off the breaker that powers the lock, or by removing the batteries from the lock.
2. Remove the cover plate. The cover plate is located on the front of the lock. To remove it, use a Phillips head screwdriver to unscrew the two screws that hold it in place.
3. Remove the old batteries. The old batteries are located in the battery compartment, which is located inside the lock. To remove them, simply slide them out of the compartment.
4. Insert the new batteries. Make sure that the positive and negative terminals of the batteries are facing the correct way.
5. Replace the cover plate. Replace the cover plate by screwing it back into place with the two Phillips head screws.
6. Turn on the power to the lock. Once the new batteries are installed, turn on the power to the lock. The lock will then be ready to use.

Troubleshooting

If you are having trouble changing the battery on your Kwikset Smart Lock, here are a few things you can check:

  • Make sure that you are using the correct type of batteries. The Kwikset Smart Lock requires two AA batteries.
  • Make sure that the batteries are inserted correctly. The positive and negative terminals of the batteries must be facing the correct way.
  • Make sure that the cover plate is properly installed. The cover plate must be screwed in tightly so that it is not loose.

If you are still having trouble changing the battery on your Kwikset Smart Lock, you can contact Kwikset customer support for assistance.

Changing the battery on your Kwikset Smart Lock is a simple process that can be completed in a few minutes. By following these steps, you can keep your lock working properly and ensure that it is always protected.

How To Change The Battery On Kwikset Smart Lock?

Kwikset smart locks are a convenient way to keep your home secure, but what happens when the battery dies? Don’t worry, changing the battery on a Kwikset smart lock is a simple process that can be completed in just a few minutes.

In this guide, we will walk you through the steps of changing the battery on a Kwikset smart lock. We will also provide some tips on how to keep your lock running smoothly and extend the life of your batteries.

3. Remove the cover plate.

The first step is to remove the cover plate from your Kwikset smart lock. To do this, you will need a small flat-head screwdriver.

1. Locate the small slot on the side of the cover plate.
2. Insert the screwdriver into the slot and pry the cover plate up.
3. Be careful not to damage the lock.

Once the cover plate is removed, you will see the battery compartment.

4. Locate the battery compartment.

The battery compartment is located on the back of the lock. It is a small, rectangular compartment with a sliding cover.

1. Slide the cover open to reveal the battery.
2. Be careful not to touch the battery terminals.

That’s it! You have now successfully changed the battery on your Kwikset smart lock.

Here are a few tips to help you keep your lock running smoothly and extend the life of your batteries:

  • Keep your lock clean and free of debris.
  • Avoid exposing your lock to extreme temperatures.
  • Replace your batteries every 6-12 months.

By following these tips, you can keep your Kwikset smart lock working properly for years to come.

How to Change the Battery on a Kwikset Smart Lock

Q: What type of batteries does my Kwikset Smart Lock use?

A: Your Kwikset Smart Lock uses two AA batteries.

Q: How long do the batteries last?

A: The batteries in your Kwikset Smart Lock should last for about one year. However, the battery life may vary depending on how often you use the lock and the conditions in which it is installed.

Q: How do I know when the batteries need to be replaced?

A: You will receive a notification on your smartphone when the batteries in your Kwikset Smart Lock are low. You can also check the battery level by pressing the lock’s keypad. If the battery level is low, you will see a flashing red light.

Q: How do I change the batteries in my Kwikset Smart Lock?

1. Remove the cover on the back of the lock.
2. Remove the old batteries.
3. Insert two new AA batteries, making sure that the positive and negative terminals are aligned correctly.
4. Replace the cover.

Q: What should I do if my Kwikset Smart Lock is not working after I change the batteries?

1. Make sure that the batteries are installed correctly.
2. Try resetting the lock by pressing and holding the keypad for 10 seconds.
3. If the lock is still not working, contact Kwikset customer support for assistance.

Q: Where can I find more information about Kwikset Smart Locks?

You can find more information about Kwikset Smart Locks on the Kwikset website: https://www.kwikset.com/smart-locks

changing the battery on a Kwikset Smart Lock is a simple process that can be completed in just a few minutes. By following the steps outlined in this guide, you can ensure that your lock is always up and running, and that you’re able to enjoy all of the benefits that come with owning a smart lock.

Here are some key takeaways from this guide:

  • The battery in a Kwikset Smart Lock typically lasts for about two years.
  • To change the battery, you will need to remove the cover plate and locate the battery compartment.
  • The battery compartment is typically located on the inside of the door, near the lock’s keypad.
  • To remove the battery, you will need to use a small flathead screwdriver to pry up the battery tab.
  • Once the battery is removed, you can insert the new battery and replace the battery cover.
  • By following these steps, you can easily change the battery on your Kwikset Smart Lock and keep it functioning properly.

Author Profile

Design By Typing
Design By Typing
We’ve turned typing into an art form. We don’t just scratch the surface; we type through it, breaking the crust of the conventional and bringing to light the layers of knowledge beneath. Our words are our paint, our keyboards the canvas, and the result? A masterpiece of information that’s as accurate as it is compelling.

We’re a band of inquisitive souls, data detectives, and prose pros. We’re not your average joe with a search engine. We dig deeper, leap further, and stay up way too late for the sake of quenching the knowledge thirst. Our team is a motley crew of expert researchers, savvy writers, and passionate nerds who believe that the right answer isn’t always the first one Google spits out.

Similar Posts