How To Enable Usb Debugging When Phone Is Broken?

How to Enable USB Debugging When Your Phone Is Broken

Your phone is broken. The screen is cracked, the buttons are jammed, and you can’t seem to get it to turn on. But there’s one thing you can still do: enable USB debugging.

USB debugging is a developer tool that allows you to access your phone’s system files and make changes that would normally be impossible. This can be useful for troubleshooting problems, recovering data, or even just customizing your phone’s software.

But how do you enable USB debugging when your phone is broken? It’s actually not as difficult as you might think. In this article, we’ll show you how to do it, step by step.

We’ll also provide some tips on troubleshooting common problems, and we’ll discuss the risks involved in enabling USB debugging. So if your phone is broken and you need to enable USB debugging, read on!

How To Enable USB Debugging When Phone Is Broken?

| Step | Action | Result |
|—|—|—|
| 1 | Power off your phone. | Your phone will turn off. |
| 2 | Hold down the Volume Down button and the Power button at the same time. | Your phone will enter the bootloader mode. |
| 3 | Use the Volume Down button to scroll down to Recovery Mode and press the Power button to select it. | Your phone will boot into Recovery Mode. |
| 4 | Use the Volume Down button to scroll down to ADB Sideload and press the Power button to select it. | Your phone will enter ADB Sideload mode. |
| 5 | Connect your phone to your computer using a USB cable. | Your computer will recognize your phone as a USB device. |
| 6 | Open a terminal window on your computer. | |
| 7 | Type the following command: `adb devices` | This command will list all of the connected USB devices. |
| 8 | If your phone is listed, type the following command: `adb shell` | This command will open a shell on your phone. |
| 9 | Type the following command: `su` | This command will give you root access on your phone. |
| 10 | Type the following command: `setprop persist.sys.usb.config diag,adb` | This command will enable USB debugging on your phone. |
| 11 | Type the following command: `exit` | This command will close the shell. |
| 12 | Disconnect your phone from your computer. | Your phone will reboot. |
| 13 | Once your phone has rebooted, you can enable USB debugging from the Settings app. | |

****

USB debugging is a developer tool that allows you to access the Android system on your phone from a computer. This can be useful for debugging problems with your phone, or for developing apps.

However, USB debugging can also be a security risk, as it allows you to access the system files on your phone. If you are not a developer, you should only enable USB debugging if you are sure you need it.

**What is USB debugging?**

USB debugging is a way to connect your Android phone to a computer and access the system files on your phone. This can be useful for debugging problems with your phone, or for developing apps.

To enable USB debugging, you need to go to the **Settings** app on your phone and tap on **Developer options**. If you don’t see the **Developer options** menu, you need to enable it first. To do this, go to **Settings** > **About phone** and tap on the **Build number** seven times.

Once you have enabled the **Developer options** menu, you will see the **USB debugging** option. Tap on it to enable USB debugging.

**Why is USB debugging useful?**

USB debugging can be useful for debugging problems with your phone. If you are having problems with your phone, you can connect it to a computer and use a debugging tool to see what is wrong. This can help you to fix the problem.

USB debugging can also be useful for developing apps. If you are developing an app for Android, you can use USB debugging to connect your phone to a computer and test your app. This can help you to find bugs in your app and fix them before you release your app to the public.

**Risks of enabling USB debugging**

Enabling USB debugging can also be a security risk. When you enable USB debugging, you are giving anyone who has access to your phone the ability to access the system files on your phone. This means that they could potentially install malicious software on your phone or steal your personal data.

If you are not a developer, you should only enable USB debugging if you are sure you need it. If you do enable USB debugging, you should be careful about who has access to your phone.

**How to enable USB debugging on a working phone**

To enable USB debugging on a working phone, follow these steps:

1. Go to the **Settings** app on your phone.
2. Tap on **Developer options**.
3. If you don’t see the **Developer options** menu, you need to enable it first. To do this, go to **Settings** > About phone and tap on the Build number seven times.
4. Once you have enabled the Developer options menu, you will see the USB debugging option. Tap on it to enable USB debugging.

USB debugging is a powerful tool that can be used for debugging problems with your phone or for developing apps. However, it is also a security risk, so you should only enable it if you are sure you need it.

If you do enable USB debugging, you should be careful about who has access to your phone.

3. How to enable USB debugging on a broken phone

If your phone is broken, you may not be able to enable USB debugging through the usual methods. However, there are a few different ways you can try.

Method 1: Using ADB over Wi-Fi

If your phone is still able to connect to Wi-Fi, you can use ADB over Wi-Fi to enable USB debugging. Here’s how:

1. Make sure your phone is connected to Wi-Fi.
2. On your computer, install the Android Debug Bridge (ADB) tools.
3. Open a command prompt window and navigate to the directory where you installed the ADB tools.
4. Type the following command:

“`
adb connect
“`

5. If you are prompted for a password, enter the password for your phone’s Wi-Fi network.
6. Once you are connected to your phone, you can enable USB debugging by typing the following command:

“`
adb shell setprop sys.usb.config diag,adb
“`

7. Reboot your phone.

Once your phone has rebooted, USB debugging will be enabled. You can now connect your phone to your computer using a USB cable and use ADB to debug your phone.

Method 2: Using a USB OTG adapter

If your phone does not have a USB port, you can use a USB OTG adapter to connect a USB mouse or keyboard to your phone. Once you have connected a USB mouse or keyboard, you can use the mouse or keyboard to enable USB debugging.

1. Connect a USB OTG adapter to your phone.
2. Connect a USB mouse or keyboard to the USB OTG adapter.
3. On your phone, open the Settings app.
4. Tap “Developer options”.
5. Tap “USB debugging”.
6. Tap the “OK” button to enable USB debugging.

Once you have enabled USB debugging, you can connect your phone to your computer using a USB cable and use ADB to debug your phone.

Method 3: Using a third-party app

There are a number of third-party apps that can be used to enable USB debugging on a broken phone. One popular app is Android Debug Bridge (ADB) Helper.

ADB Helper is a free app that allows you to enable USB debugging on your phone without having to use a computer. To use ADB Helper, follow these steps:

1. Install the ADB Helper app on your phone.
2. Open the ADB Helper app.
3. Tap the “Enable USB debugging” button.
4. Follow the on-screen instructions to enable USB debugging.

Once you have enabled USB debugging, you can connect your phone to your computer using a USB cable and use ADB to debug your phone.

Tips and tricks for troubleshooting problems

If you are having trouble enabling USB debugging on your broken phone, here are a few tips and tricks that may help:

  • Make sure your phone is running the latest version of Android.
  • Make sure your phone is connected to Wi-Fi or has a USB OTG adapter connected.
  • Make sure you are using the correct ADB commands.
  • Try restarting your phone.
  • Try uninstalling and reinstalling the ADB tools.
  • Try using a different USB cable.
  • Try using a different computer.

If you are still having trouble enabling USB debugging, you can contact your phone manufacturer or carrier for help.

4. What to do if you can’t enable USB debugging

If you can’t enable USB debugging on your phone, there are a few things you can do.

  • Try a different method. There are a few different methods for enabling USB debugging, so if one method doesn’t work, try another.
  • Contact your phone manufacturer or carrier. They may be able to help you enable USB debugging.
  • Use a third-party app. There are a number of third-party apps that can be used to enable USB debugging.

If you are still unable to enable USB debugging, you may need to take your phone to a repair shop.

Enabling USB debugging on a broken phone can be difficult, but it is possible. By following the steps in this guide, you should be able to enable USB debugging on your phone and use ADB to debug your phone.

If you have any questions or need help, please leave a comment below.

How do I enable USB debugging when my phone is broken?

There are a few ways to enable USB debugging when your phone is broken.

  • If your phone has a broken screen, you can use a USB OTG cable to connect a mouse to your phone. Once the mouse is connected, you can use the mouse to navigate to the Settings menu and enable USB debugging.
  • If your phone has a broken power button, you can use a third-party app to enable USB debugging. One such app is ADB Debugging Enabler. This app allows you to enable USB debugging without having to use the power button.
  • If your phone is completely unresponsive, you can try to enable USB debugging using the Android Debug Bridge (ADB). ADB is a command-line tool that allows you to control your Android device from a computer. To use ADB, you will need to connect your phone to your computer and install the Android SDK Platform-Tools. Once the SDK is installed, you can open a command prompt and type the following command:

“`
adb devices
“`

This command will list all of the devices that are connected to your computer. If your phone is connected, you will see a device ID listed. You can then use the following command to enable USB debugging:

“`
adb shell setprop sys.usb.config diag,adb
“`

Once USB debugging is enabled, you can disconnect your phone from your computer and use the ADB commands to control your device.

What are the risks of enabling USB debugging?

Enabling USB debugging allows you to access your phone’s system files, which can be dangerous if you are not careful. If you enable USB debugging, you should only do so from a trusted computer. You should also be aware that if you connect your phone to a computer that is infected with malware, the malware could be installed on your phone.

How do I disable USB debugging?

To disable USB debugging, you can follow the same steps that you used to enable it. If you enabled USB debugging using the Android Debug Bridge (ADB), you can disable it by typing the following command in a command prompt:

“`
adb shell setprop sys.usb.config none
“`

Once USB debugging is disabled, you will no longer be able to access your phone’s system files from a computer.

Can I enable USB debugging without a computer?

Yes, you can enable USB debugging without a computer. However, you will need to use a third-party app. One such app is ADB Debugging Enabler. This app allows you to enable USB debugging without having to use a computer.

What are the benefits of enabling USB debugging?

Enabling USB debugging can be beneficial for developers and power users. Developers can use USB debugging to debug their apps and to test their apps on different devices. Power users can use USB debugging to access their phone’s system files and to root their phones.

What are the drawbacks of enabling USB debugging?

The main drawback of enabling USB debugging is that it can make your phone more vulnerable to malware. If you enable USB debugging, you should only do so from a trusted computer. You should also be aware that if you connect your phone to a computer that is infected with malware, the malware could be installed on your phone.

In this tutorial, we have discussed how to enable USB debugging when your phone is broken. We first explored the different ways to enable USB debugging on a working phone, and then we showed how to use these methods to enable USB debugging on a broken phone.

We hope that this tutorial has been helpful. If you have any questions, please feel free to leave them in the comments below.

Author Profile

Design By Typing
Design By Typing
We’ve turned typing into an art form. We don’t just scratch the surface; we type through it, breaking the crust of the conventional and bringing to light the layers of knowledge beneath. Our words are our paint, our keyboards the canvas, and the result? A masterpiece of information that’s as accurate as it is compelling.

We’re a band of inquisitive souls, data detectives, and prose pros. We’re not your average joe with a search engine. We dig deeper, leap further, and stay up way too late for the sake of quenching the knowledge thirst. Our team is a motley crew of expert researchers, savvy writers, and passionate nerds who believe that the right answer isn’t always the first one Google spits out.

Similar Posts