How To Load Stihl Weed Eater String?

How to Load Stihl Weed Eater String

Your Stihl weed eater is a powerful tool that can help you keep your yard looking its best. But if the string breaks or runs out, you’ll need to know how to load it. Fortunately, it’s a simple process that only takes a few minutes.

In this article, we’ll walk you through the steps of loading string on a Stihl weed eater. We’ll also provide some tips on how to choose the right string for your needs. So whether you’re a first-time user or you’re just looking for a refresher, read on for all the information you need to know.

Step Instructions Image
1 Turn off the weed eater and disconnect the spark plug wire.
2 Remove the spool cover by pressing the release button and sliding the cover off.
3 Load the new string onto the spool, making sure that the ends of the string are even.
4 Replace the spool cover and tighten the screws.

How to Load Stihl Weed Eater String?

Stihl weed eaters are a popular choice for homeowners and professionals alike. They are powerful and efficient, and they can handle a variety of tasks. However, one of the most common problems with weed eaters is that the string can become tangled or break. If this happens, it can be difficult to get the weed eater to work properly.

Fortunately, loading Stihl weed eater string is a relatively simple process. By following a few simple steps, you can get your weed eater back up and running in no time.

Preparing the Weed Eater

Before you can load the string, you need to prepare the weed eater. This involves removing the trimmer head cover and inspecting the trimmer head for any damage.

To remove the trimmer head cover, locate the two screws on the side of the trimmer head. Use a screwdriver to loosen the screws and remove the cover.

Once the cover is removed, you can inspect the trimmer head for any damage. Look for cracks, chips, or other signs of wear and tear. If you find any damage, you will need to replace the trimmer head before you can load the string.

Removing Old String

If there is any old string left in the trimmer head, you will need to remove it before you can load new string. To do this, use a pair of pliers to grab the end of the string and pull it out of the trimmer head.

You may need to use a little force to remove the old string. Be careful not to damage the trimmer head.

Loading the String

Now that the trimmer head is clean and free of old string, you can start loading the new string.

To do this, cut two pieces of string to the correct length. The length of the string will vary depending on the model of your weed eater. However, a good rule of thumb is to cut the string so that it is about twice as long as the width of the trimmer head.

Once you have cut the string, thread one end of each piece through the eyelets in the trimmer head. Then, tie the ends of the string together in a knot.

Trimming the String

Once the string is loaded, you will need to trim it so that it is the correct length. To do this, use a pair of scissors to trim the string so that it is about 1/2 inch longer than the width of the trimmer head.

Now that you know how to load Stihl weed eater string, you can keep your weed eater running smoothly and efficiently. By following these simple steps, you can get your weed eater back up and running in no time.

Here are some additional tips for loading Stihl weed eater string:

  • Use high-quality string. Stihl weed eater string is designed specifically for Stihl weed eaters. It is made from a durable material that will resist wear and tear.
  • Use the correct amount of string. Too much string can cause the weed eater to become tangled. Too little string can cause the weed eater to lose power.
  • Trim the string regularly. As the string wears down, it will become shorter. Trim the string regularly to keep it the correct length.

By following these tips, you can keep your Stihl weed eater running smoothly and efficiently for years to come.

3. Adjusting the String

Once you have loaded the string onto the weed eater, you will need to adjust it so that it is the correct length and tension.

To adjust the length of the string, you will need to:

1. Turn off the weed eater.
2. Remove the spool cover.
3. Use a pair of pliers to pull the string out until it is the desired length.
4. Replace the spool cover.

To adjust the tension of the string, you will need to:

1. Turn off the weed eater.
2. Loosen the lock nut on the spool.
3. Use a screwdriver to turn the spool adjustment screw clockwise to tighten the string or counterclockwise to loosen it.
4. Tighten the lock nut.

4. Testing the Weed Eater

Once you have adjusted the string, you will need to test the weed eater to make sure that the string is cutting through the weeds properly.

To test the weed eater, you will need to:

1. Turn on the weed eater.
2. Hold the weed eater at a 45-degree angle to the ground.
3. Move the weed eater back and forth across the weeds.

The string should cut through the weeds cleanly without tangling or snapping. If the string is not cutting through the weeds properly, you may need to adjust the length or tension of the string.

Loading, adjusting, and testing the string on a Stihl weed eater is a simple process that can be completed in a few minutes. By following these steps, you can ensure that your weed eater is properly maintained and that it is cutting through the weeds effectively.

How do I load Stihl weed eater string?

1. Turn off the weed eater and disconnect the spark plug wire. This will prevent the weed eater from starting accidentally while you are loading the string.
2. Remove the spool cover. On most Stihl weed eaters, the spool cover is located on the top of the weed eater. To remove it, simply unscrew the two screws that hold it in place.
3. Thread the new string through the eyelets on the spool. The eyelets are located on the inside of the spool. The string should be threaded through the eyelets in a criss-cross pattern.
4. Tuck the ends of the string into the spool. The ends of the string should be tucked into the spool so that they are not visible.
5. Replace the spool cover. Once the string is loaded, replace the spool cover and tighten the screws.
6. Reconnect the spark plug wire. Now that the weed eater is loaded, you can reconnect the spark plug wire and start it up.

What type of string should I use for my Stihl weed eater?

The type of string you use for your Stihl weed eater will depend on the type of vegetation you will be clearing. For general-purpose use, a .095-inch diameter string is a good choice. For thicker vegetation, such as vines or brambles, a 1.10-inch diameter string is recommended.

How often do I need to replace the string on my Stihl weed eater?

The frequency with which you need to replace the string on your Stihl weed eater will depend on how often you use it and the type of vegetation you are clearing. As a general rule, you should replace the string when it becomes frayed or worn.

How do I adjust the string tension on my Stihl weed eater?

The string tension on your Stihl weed eater can be adjusted by turning the tension knob on the side of the weed eater. Turning the knob clockwise will increase the string tension, while turning it counterclockwise will decrease the string tension.

What should I do if my Stihl weed eater is not cutting grass?

There are a few things you can check if your Stihl weed eater is not cutting grass. First, make sure that the string is properly loaded and that the string tension is correct. If the string is still not cutting grass, you may need to sharpen the string. To sharpen the string, you can use a file or a sharpening tool designed specifically for weed eater strings.

How do I clean my Stihl weed eater?

To clean your Stihl weed eater, you will need to:

1. Turn off the weed eater and disconnect the spark plug wire.
2. Remove the spool cover.
3. Use a brush to remove any dirt or debris from the spool and the string.
4. Wipe down the outside of the weed eater with a damp cloth.
5. Reattach the spool cover.
6. Reconnect the spark plug wire.

loading string on a Stihl weed eater is a simple process that can be completed in just a few minutes. By following the steps outlined in this guide, you can ensure that your weed eater is properly equipped to handle even the most challenging weeds.

Here are the key takeaways from this guide:

  • Use the correct type of string for your weed eater.
  • Make sure the string is the correct length.
  • Follow the manufacturer’s instructions for loading the string.
  • Keep your weed eater well-maintained to ensure long life and peak performance.

By following these tips, you can keep your Stihl weed eater running smoothly and efficiently for years to come.

Author Profile

Design By Typing
Design By Typing
We’ve turned typing into an art form. We don’t just scratch the surface; we type through it, breaking the crust of the conventional and bringing to light the layers of knowledge beneath. Our words are our paint, our keyboards the canvas, and the result? A masterpiece of information that’s as accurate as it is compelling.

We’re a band of inquisitive souls, data detectives, and prose pros. We’re not your average joe with a search engine. We dig deeper, leap further, and stay up way too late for the sake of quenching the knowledge thirst. Our team is a motley crew of expert researchers, savvy writers, and passionate nerds who believe that the right answer isn’t always the first one Google spits out.

Similar Posts