How To Program Rain Bird Esp Tm2?

How to Program a Rain Bird ESP-TM2

The Rain Bird ESP-TM2 is a popular irrigation controller that can be used to automate your sprinkler system. It is easy to use and program, and it can save you time and money on your water bill.

This article will provide you with step-by-step instructions on how to program your Rain Bird ESP-TM2. We will cover everything from setting up your zones to scheduling your irrigation. By the end of this article, you will be able to program your Rain Bird ESP-TM2 like a pro!

So, if you’re ready to start saving money on your water bill, keep reading!

Step Instructions Image
1 Turn on the ESP TM2 controller and press the Menu button.
2 Use the + and buttons to scroll to the Station menu.
3 Press the Enter button to select the station you want to program.
4 Use the + and buttons to scroll to the Run Time setting.
5 Press the Enter button to enter the run time setting.
6 Use the + and buttons to adjust the run time.
7 Press the Enter button to save the run time setting.
8 Repeat steps 3-7 for each station you want to program.
9 Press the Menu button to exit the programming mode.

The Rain Bird ESP-TM2 is a programmable irrigation controller that allows you to control your sprinkler system with ease. It is easy to install and program, and it offers a variety of features that can help you save water and money.

This guide will walk you through the process of programming your Rain Bird ESP-TM2 controller. We will cover everything from gathering the required materials to setting up the controller and programming your zones.

By the end of this guide, you will be able to use your Rain Bird ESP-TM2 controller to create a custom watering schedule that meets the needs of your lawn and landscape.

Step 1: Gather the Required Materials

To program your Rain Bird ESP-TM2 controller, you will need the following materials:

  • Rain Bird ESP-TM2 Controller
  • Wire strippers
  • Crimping tool
  • Wire nuts
  • Pliers
  • Tape measure
  • Pencil
  • Paper

Step 2: Install the Controller

The first step in programming your Rain Bird ESP-TM2 controller is to install it. To do this, you will need to mount the controller to a wall or post.

The controller can be mounted using the included mounting bracket. To mount the bracket, follow these steps:

1. Choose a location for the controller that is out of direct sunlight and away from water sources.
2. Mark the location of the mounting holes on the wall or post.
3. Drill the mounting holes.
4. Insert the screws into the mounting holes and tighten them.
5. Attach the mounting bracket to the wall or post.
6. Mount the controller to the mounting bracket.

Once the controller is mounted, you can connect the power supply and the wires from the sprinkler heads.

Step 3: Connect the Power Supply

To connect the power supply, you will need to do the following:

1. Find the power supply connector on the back of the controller.
2. Connect the red wire from the power supply to the “+” terminal on the controller.
3. Connect the black wire from the power supply to the “-” terminal on the controller.

Step 4: Connect the Wires from the Sprinkler Heads

To connect the wires from the sprinkler heads, you will need to do the following:

1. Find the terminal block on the back of the controller.
2. Connect the green wire from each sprinkler head to the corresponding terminal on the terminal block.
3. Connect the white wire from each sprinkler head to the common terminal on the terminal block.

Step 5: Program the Controller

Now that the controller is installed and the wires are connected, you can program the controller. To do this, you will need to follow these steps:

1. Press the “Menu” button.
2. Use the arrow keys to scroll to the “Program” menu.
3. Press the “Enter” button.
4. Use the arrow keys to scroll to the zone you want to program.
5. Press the “Enter” button.
6. Use the arrow keys to scroll to the day of the week you want to program.
7. Press the “Enter” button.
8. Use the arrow keys to scroll to the start time you want to program.
9. Press the “Enter” button.
10. Use the arrow keys to scroll to the duration you want to program.
11. Press the “Enter” button.
12. Repeat steps 6-11 for each zone you want to program.

Once you have programmed all of the zones, you can press the “Menu” button to exit the programming mode.

By following these steps, you can easily program your Rain Bird ESP-TM2 controller. With a little time and effort, you can create a custom watering schedule that will help you save water and money.

Step 3: Program the Controller

To program the Rain Bird ESP TM2 controller, you will need to:

1. Set the time and date.

2. Set the watering schedule.

3. Set the watering duration.

Set the time and date

To set the time and date on the Rain Bird ESP TM2 controller, follow these steps:

1. Press the Menu button.
2. Use the < and **> buttons to scroll to the Time and Date** settings.
3. Use the + and buttons to adjust the time and date.
4. Press the Menu button to save your changes.

Set the watering schedule

To set the watering schedule on the Rain Bird ESP TM2 controller, follow these steps:

1. Press the Menu button.
2. Use the < and **> buttons to scroll to the Watering Schedule** settings.
3. Use the + and buttons to adjust the days and times that you want the sprinklers to water.
4. Press the Menu button to save your changes.

Set the watering duration

To set the watering duration on the Rain Bird ESP TM2 controller, follow these steps:

1. Press the Menu button.
2. Use the < and **> buttons to scroll to the Watering Duration** settings.
3. Use the + and buttons to adjust the length of time that you want the sprinklers to water for.
4. Press the Menu button to save your changes.

Step 4: Test the System

To test the Rain Bird ESP TM2 controller, follow these steps:

1. Turn on the power to the controller.
2. The sprinklers should come on according to the watering schedule.
3. Check for leaks.

If the sprinklers do not come on or if you find any leaks, you will need to troubleshoot the problem. For more information on troubleshooting the Rain Bird ESP TM2 controller, please refer to the owner’s manual.

Programming the Rain Bird ESP TM2 controller is a simple process that can be completed in just a few minutes. By following the steps in this guide, you can easily set up your controller to water your lawn and gardens automatically.

How do I program the Rain Bird ESP TM2?

1. Turn on the power to the ESP TM2. The power switch is located on the back of the controller.
2. Press the Menu** button to enter the programming mode.
3. Use the Up** and Down arrows to scroll to the Station number you want to program.
4. Press the Enter** button to select the station.
5. Use the Up** and Down arrows to scroll to the Run Time setting.
6. Press the Enter** button to set the run time.
7. **Repeat steps 3-6 for each station you want to program.
8. Press the Menu** button to exit the programming mode.

What are the different programming modes on the Rain Bird ESP TM2?

The Rain Bird ESP TM2 has three programming modes:

  • Basic mode: This mode is used to set the basic operation of the controller, such as the start time, run time, and day of the week for each station.
  • Advanced mode: This mode is used to set more advanced features of the controller, such as the rain delay, battery backup, and freeze protection.
  • Soil Moisture mode: This mode is used to set the controller to automatically water based on the moisture level of the soil.

How do I set the start time on the Rain Bird ESP TM2?

To set the start time on the Rain Bird ESP TM2, follow these steps:

1. Press the Menu** button to enter the programming mode.
2. Use the Up** and Down arrows to scroll to the Start Time setting.
3. Press the Enter** button to set the start time.
4. Press the Menu** button to exit the programming mode.

How do I set the run time on the Rain Bird ESP TM2?

To set the run time on the Rain Bird ESP TM2, follow these steps:

1. Press the Menu** button to enter the programming mode.
2. Use the Up** and Down arrows to scroll to the Run Time setting.
3. Press the Enter** button to set the run time.
4. Press the Menu** button to exit the programming mode.

How do I set the day of the week for a station on the Rain Bird ESP TM2?

To set the day of the week for a station on the Rain Bird ESP TM2, follow these steps:

1. Press the Menu** button to enter the programming mode.
2. Use the Up** and Down arrows to scroll to the Day of Week setting.
3. Press the Enter** button to set the day of the week.
4. Press the Menu** button to exit the programming mode.

How do I set the rain delay on the Rain Bird ESP TM2?

To set the rain delay on the Rain Bird ESP TM2, follow these steps:

1. Press the Menu** button to enter the programming mode.
2. Use the Up** and Down arrows to scroll to the Rain Delay setting.
3. Press the Enter** button to set the rain delay.
4. Press the Menu** button to exit the programming mode.

the Rain Bird ESP TM2 is a versatile and easy-to-use irrigation controller that can be programmed to meet the needs of any lawn or garden. With its multiple features and options, the ESP TM2 can help you save water, time, and money. By following the steps in this guide, you can easily program your ESP TM2 to control your irrigation system and enjoy a beautiful, green lawn all season long.

Here are some key takeaways from this guide:

  • The ESP TM2 can be programmed to water your lawn and garden on a schedule, or it can be set to water based on the weather.
  • The controller has a built-in rain sensor that will prevent your irrigation system from running when it rains.
  • The ESP TM2 can be connected to your home’s Wi-Fi network, so you can control it from anywhere with an internet connection.
  • The controller is backed by a limited warranty.

By following the steps in this guide, you can easily program your ESP TM2 and enjoy all the benefits of this state-of-the-art irrigation controller.

Author Profile

Design By Typing
Design By Typing
We’ve turned typing into an art form. We don’t just scratch the surface; we type through it, breaking the crust of the conventional and bringing to light the layers of knowledge beneath. Our words are our paint, our keyboards the canvas, and the result? A masterpiece of information that’s as accurate as it is compelling.

We’re a band of inquisitive souls, data detectives, and prose pros. We’re not your average joe with a search engine. We dig deeper, leap further, and stay up way too late for the sake of quenching the knowledge thirst. Our team is a motley crew of expert researchers, savvy writers, and passionate nerds who believe that the right answer isn’t always the first one Google spits out.

Similar Posts