How To Replace Freestyle Libre 2 Sensor?

How to Replace a Freestyle Libre 2 Sensor

The Freestyle Libre 2 is a continuous glucose monitor (CGM) that measures your blood sugar levels in real time. It’s a small, discreet device that you wear on the back of your arm. The sensor is replaced every 14 days, and the process is quick and easy.

In this article, we’ll walk you through the steps of replacing a Freestyle Libre 2 sensor. We’ll provide detailed instructions and images, so you can feel confident in your ability to do it yourself.

We’ll also discuss some of the common problems that people encounter when replacing sensors, and how to troubleshoot them. By the end of this article, you’ll be an expert in replacing Freestyle Libre 2 sensors.

Step Instructions Image
1. Wash your hands with soap and water. This will help to prevent infection.
2. Remove the old sensor. Gently peel the sensor off of your skin.
3. Clean the sensor site with an alcohol wipe. This will help to remove any dirt or bacteria that may be present.
4. Apply a new sensor. Peel the backing off of the new sensor and place it on your skin.
5. Press down on the sensor for about 30 seconds to make sure it is secure. This will help to prevent the sensor from coming loose.

Step 1: Prepare your skin

Before you can replace your Freestyle Libre 2 sensor, you need to prepare your skin. This involves cleaning the area where you will be inserting the new sensor and making sure that it is dry.

To clean the area, wash your hands with soap and water and then use an alcohol wipe to clean the skin where you will be inserting the sensor. Make sure that the area is completely dry before you continue.

Step 2: Remove the old sensor

To remove the old sensor, you will need to use the removal tool that came with your Freestyle Libre 2 kit.

First, hold the removal tool in one hand and the sensor in the other. Gently slide the removal tool under the sensor until you reach the adhesive.

Once you have reached the adhesive, twist the removal tool clockwise to loosen the sensor. Continue to twist the removal tool until the sensor pops off.

Be careful not to pull on the sensor, as this could damage the skin.

Tips for removing the old sensor

Here are a few tips for removing the old sensor:

  • If the sensor is stuck, you can try soaking it in warm water for a few minutes. This will help to loosen the adhesive.
  • You can also try using a hair dryer on the low setting to warm up the adhesive. This will also help to loosen it.
  • If you are still having trouble removing the sensor, you can contact your healthcare provider for assistance.

Step 3: Insert the new sensor

To insert the new sensor, you will need to follow the instructions that came with your Freestyle Libre 2 kit.

Here are the basic steps involved in inserting the new sensor:

1. Wash your hands with soap and water.
2. Peel the backing off of the sensor.
3. Hold the sensor in place on your arm for 30 seconds.
4. Apply the adhesive patch over the sensor.

Tips for inserting the new sensor

Here are a few tips for inserting the new sensor:

  • Make sure that the area where you are inserting the sensor is clean and dry.
  • Hold the sensor in place for 30 seconds to make sure that it is secure.
  • Apply the adhesive patch over the sensor to keep it in place.

Step 4: Calibrate the sensor

After you have inserted the new sensor, you will need to calibrate it. This involves using your blood glucose meter to check your blood sugar level and then entering the reading into the Freestyle Libre 2 app.

To calibrate the sensor, follow these steps:

1. Open the Freestyle Libre 2 app.
2. Tap the “Sensor” tab.
3. Tap the “Calibrate” button.
4. Enter your blood sugar level.
5. Tap the “OK” button.

The sensor will now be calibrated and you can start using it to track your blood sugar levels.

Tips for calibrating the sensor

Here are a few tips for calibrating the sensor:

  • Make sure that you are using a fresh blood glucose meter.
  • Check your blood sugar level at the same time each day.
  • Enter your blood sugar level into the app as soon as you get the reading.

Replacing a Freestyle Libre 2 sensor is a simple process that can be completed in a few minutes. By following these steps, you can ensure that your sensor is properly inserted and calibrated so that you can get accurate blood sugar readings.

Step 3: Apply the new sensor

To apply the new sensor, follow these steps:

1. Wash your hands with soap and water.
2. Remove the old sensor by peeling it off your skin.
3. Clean the area where you will insert the new sensor with an alcohol wipe.
4. Remove the protective backing from the new sensor.
5. Press the sensor firmly onto your skin for 30 seconds.
6. Hold the sensor in place for 10 minutes to allow it to adhere to your skin.

Once the sensor is applied, you can start using it to track your blood sugar levels.

Step 4: Calibrate the sensor

Before you can use the Freestyle Libre 2 sensor to track your blood sugar levels, you need to calibrate it. Calibration is the process of adjusting the sensor’s readings so that they match your blood sugar levels.

To calibrate the sensor, follow these steps:

1. Wash your hands with soap and water.
2. Prick your finger with a lancet and collect a drop of blood.
3. Apply the blood to the calibration strip.
4. Insert the calibration strip into the reader.
5. Follow the on-screen instructions to calibrate the sensor.

Once the sensor is calibrated, you can start using it to track your blood sugar levels.

The Freestyle Libre 2 sensor is a great way to track your blood sugar levels. It is easy to use and provides accurate readings. If you are looking for a way to monitor your blood sugar levels, the Freestyle Libre 2 sensor is a great option.

Here are some additional tips for using the Freestyle Libre 2 sensor:

  • Keep the sensor dry and clean.
  • Avoid wearing tight clothing or jewelry over the sensor.
  • If you have any questions about using the sensor, talk to your doctor or diabetes educator.

By following these tips, you can get the most out of the Freestyle Libre 2 sensor and use it to improve your diabetes management.

How do I replace a Freestyle Libre 2 sensor?

1. Wash your hands with soap and water.
2. Remove the old sensor by pulling it straight out of your skin. Discard the old sensor according to your local waste disposal regulations.
3. Cleanse the area where you will insert the new sensor with an alcohol wipe.
4. Peel the backing off of the new sensor and apply it to your skin. Press firmly for 30 seconds to make sure it is secure.
5. Allow the sensor to warm up for 2 hours before using it.

What if my sensor is not working properly?

There are a few things that could be causing your sensor to not work properly. Here are some troubleshooting tips:

  • Make sure that the sensor is inserted correctly and that the adhesive is secure.
  • Check the expiration date on the sensor. If the sensor is expired, it will not work properly.
  • Try restarting your glucose monitor.
  • If you are still having problems, contact Abbott Diabetes Care customer support for assistance.

How often do I need to replace my sensor?

The Freestyle Libre 2 sensor lasts for 14 days. You can replace it with a new sensor after 14 days, or sooner if you are experiencing any problems with the sensor.

Can I use the Freestyle Libre 2 sensor on my arm?

Yes, you can use the Freestyle Libre 2 sensor on your arm. However, it is not recommended to use the sensor on your inner arm or on areas of your skin that are frequently exposed to sunlight.

What are the benefits of using the Freestyle Libre 2 sensor?

The Freestyle Libre 2 sensor offers a number of benefits over traditional blood glucose monitoring methods. These benefits include:

  • Continuous glucose monitoring (CGM): The Freestyle Libre 2 sensor provides continuous glucose readings, which can help you to better understand your glucose levels and make informed decisions about your diabetes management.
  • Real-time glucose readings: The Freestyle Libre 2 app sends glucose readings to your smartphone in real time, so you can see your glucose levels at a glance.
  • A 14-day wear time: The Freestyle Libre 2 sensor lasts for 14 days, so you don’t have to worry about changing it as often as you do with traditional blood glucose meters.
  • Water-resistant: The Freestyle Libre 2 sensor is water-resistant, so you can wear it while swimming or showering.

What are the risks of using the Freestyle Libre 2 sensor?

There are a few risks associated with using the Freestyle Libre 2 sensor. These risks include:

  • Skin irritation: The adhesive on the Freestyle Libre 2 sensor can cause skin irritation in some people. If you experience skin irritation, you can try using a different location for your sensor or using a skin barrier cream.
  • Sensor failure: The Freestyle Libre 2 sensor can fail for a variety of reasons, such as if it is not inserted correctly or if it comes in contact with moisture. If your sensor fails, you will need to replace it with a new one.
  • Accuracy: The Freestyle Libre 2 sensor is not as accurate as a traditional blood glucose meter. However, it is still a valuable tool for managing your diabetes.

Is the Freestyle Libre 2 sensor covered by insurance?

The Freestyle Libre 2 sensor is covered by insurance for some people. However, your coverage may vary depending on your insurance plan. You can check with your insurance provider to see if the Freestyle Libre 2 sensor is covered.

In this article, we have discussed how to replace a Freestyle Libre 2 sensor. We have covered the steps in detail, from preparing the skin to inserting the new sensor. We have also provided some tips for troubleshooting common problems.

We hope that this article has been helpful. If you have any further questions, please do not hesitate to contact us.

Author Profile

Design By Typing
Design By Typing
We’ve turned typing into an art form. We don’t just scratch the surface; we type through it, breaking the crust of the conventional and bringing to light the layers of knowledge beneath. Our words are our paint, our keyboards the canvas, and the result? A masterpiece of information that’s as accurate as it is compelling.

We’re a band of inquisitive souls, data detectives, and prose pros. We’re not your average joe with a search engine. We dig deeper, leap further, and stay up way too late for the sake of quenching the knowledge thirst. Our team is a motley crew of expert researchers, savvy writers, and passionate nerds who believe that the right answer isn’t always the first one Google spits out.

Similar Posts