How To Replace String On Ryobi 40V Cordless Trimmer?

How to Replace String on a Ryobi 40V Cordless Trimmer

Your Ryobi 40V cordless trimmer is a powerful and versatile tool that can make quick work of trimming grass, weeds, and brush. But what happens when the string trimmer line starts to fray or break? Don’t worry, replacing the string is a simple task that can be completed in just a few minutes.

In this article, we’ll show you how to replace the string on your Ryobi 40V cordless trimmer. We’ll provide step-by-step instructions and images to help you along the way. So if you’re ready to learn how to keep your trimmer running smoothly, read on!

What You’ll Need

To replace the string on your Ryobi 40V cordless trimmer, you’ll need the following materials:

  • Replacement string (.095-inch diameter)
  • Pliers
  • Flat-head screwdriver

Step-by-Step Instructions

1. Turn off the trimmer and disconnect the battery.
2. Locate the string head on the trimmer. It’s a small, cylindrical-shaped object located near the bottom of the trimmer.
3. Use the pliers to pry open the string head.
4. Remove the old string.
5. Insert the new string into the string head.
6. Use the pliers to tighten the string head.
7. Reattach the battery and turn on the trimmer.

Tips

  • When choosing replacement string, make sure to get the correct size. For a Ryobi 40V cordless trimmer, you’ll need .095-inch diameter string.
  • If the string is too long, it can cause the trimmer to vibrate excessively. To avoid this, trim the string to the correct length before inserting it into the string head.
  • Be careful not to pinch your fingers when tightening the string head.

    Step Instructions Image
    1 Turn off the trimmer and unplug it from the power outlet.
    2 Locate the string head on the trimmer. It is a small, round cap located on the front of the trimmer.
    3 Press down on the release button and slide the string head off of the trimmer.
    4 Unwind the old string from the spool.
    5 Wind the new string onto the spool. Make sure that the string is wound in the same direction as the old string.
    6 Slide the string head back onto the trimmer.
    7 Turn on the trimmer and test the string.

    Tools and Materials Needed

    To replace the string on your Ryobi 40V cordless trimmer, you will need the following tools and materials:

    • A Phillips head screwdriver
    • A pair of pliers
    • Replacement string

    Steps to Replace String

    1. Turn off the trimmer and disconnect the battery.
    2. Locate the string head on the trimmer. It is a small, plastic cap located on the underside of the trimmer.
    3. Use the Phillips head screwdriver to remove the screws that hold the string head in place.
    4. Remove the string head from the trimmer.
    5. Inspect the old string. If it is frayed or damaged, you will need to cut it off with the pliers.
    6. Thread the new string through the eyelets in the string head.
    7. Reattach the string head to the trimmer.
    8. Tighten the screws to secure the string head in place.
    9. Turn on the trimmer and test the string.

    Replacing the string on your Ryobi 40V cordless trimmer is a simple task that can be completed in a few minutes. By following these steps, you can keep your trimmer in good working order and ensure that it is always ready to use.

    What You Will Need

    To replace the string on your Ryobi 40V cordless trimmer, you will need the following materials:

    • A new spool of trimmer line
    • A pair of pliers
    • A screwdriver

    Steps to Replace the String

    1. Turn off the trimmer and disconnect the battery.
    2. Locate the string head on the trimmer. It is usually located at the front of the trimmer, near the cutting blade.
    3. Remove the string head cover. There is usually a small button or tab that you can press to release the cover.
    4. Remove the old spool of string. There is usually a small release button or tab that you can press to release the spool.
    5. Insert the new spool of string into the string head. Make sure that the string is wound in the correct direction.
    6. Secure the new spool of string in place. There is usually a small screw or clip that you can use to secure the spool.
    7. Replace the string head cover.
    8. Turn on the trimmer and test the string.

    Tips for Replacing the String

    • Make sure that the string is the correct size for your trimmer. The size of the string is usually printed on the spool.
    • Wind the string in the correct direction. The string should be wound clockwise on the spool.
    • Tighten the string securely. The string should be tight enough so that it does not come loose while you are trimming.
    • Test the string before you start trimming. Make sure that the string is the correct length and that it is cutting properly.

    Replacing the string on your Ryobi 40V cordless trimmer is a simple task that can be completed in a few minutes. By following these steps, you can keep your trimmer running smoothly and efficiently.

    How do I replace the string on my Ryobi 40V cordless trimmer?

    1. Turn off the trimmer and unplug it from the charger.
    2. Locate the string head on the trimmer. It is a small, round cap located on the underside of the trimmer.
    3. Press down on the release button and turn the string head counterclockwise to remove it.
    4. Thread the new string through the eyelets in the string head. The eyelets are located on the inside of the string head.
    5. Pull the string tight and trim it to the desired length. The string should be about 1/2 inch longer than the cutting width of the trimmer.
    6. Replace the string head by turning it clockwise until it is snugly in place.
    7. Turn on the trimmer and test it to make sure the string is properly installed.

    What type of string do I need for my Ryobi 40V cordless trimmer?

    You will need .065-inch diameter nylon string for your Ryobi 40V cordless trimmer.

    **How often do I need to replace the string on my Ryobi 40V cordless trimmer?

    The frequency with which you need to replace the string on your Ryobi 40V cordless trimmer will depend on how often you use it and how thick the vegetation you are trimming is. As a general rule, you should replace the string when it starts to fray or break.

    **What if the string on my Ryobi 40V cordless trimmer gets tangled?

    If the string on your Ryobi 40V cordless trimmer gets tangled, you can try to untangle it by hand. If you are unable to untangle the string, you can remove the string head and replace the string.

    **Where can I buy replacement string for my Ryobi 40V cordless trimmer?

    You can purchase replacement string for your Ryobi 40V cordless trimmer at most hardware stores and online retailers.

    In this blog post, we have discussed how to replace the string on a Ryobi 40V cordless trimmer. We started by identifying the parts of the trimmer that we would need to access in order to replace the string. We then discussed the steps involved in removing the old string and installing the new string. Finally, we provided some tips for troubleshooting common problems that you may encounter when replacing the string on your trimmer.

    We hope that this blog post has been helpful and that you are now able to replace the string on your Ryobi 40V cordless trimmer with ease. If you have any further questions, please do not hesitate to contact us.

    Author Profile

    Design By Typing
    Design By Typing
    We’ve turned typing into an art form. We don’t just scratch the surface; we type through it, breaking the crust of the conventional and bringing to light the layers of knowledge beneath. Our words are our paint, our keyboards the canvas, and the result? A masterpiece of information that’s as accurate as it is compelling.

    We’re a band of inquisitive souls, data detectives, and prose pros. We’re not your average joe with a search engine. We dig deeper, leap further, and stay up way too late for the sake of quenching the knowledge thirst. Our team is a motley crew of expert researchers, savvy writers, and passionate nerds who believe that the right answer isn’t always the first one Google spits out.

Similar Posts