How To Reset Maytag Commercial Washer?

How to Reset a Maytag Commercial Washer

Your Maytag commercial washer is an essential part of your business, and it’s important to keep it running smoothly. If your washer is not working properly, one of the first things you should try is resetting it. Resetting your washer can often fix minor problems, such as a stuck cycle or a door that won’t close.

In this article, we will show you how to reset a Maytag commercial washer. We will also provide tips on troubleshooting other common problems with your washer.

What is a Reset Button?

The reset button on a Maytag commercial washer is a small button located on the front of the machine, usually near the control panel. Pressing the reset button will stop the current cycle and reset the washer to its default settings.

How to Reset a Maytag Commercial Washer

To reset a Maytag commercial washer, follow these steps:

1. Turn off the washer by pressing the power button.
2. Locate the reset button on the front of the machine.
3. Press and hold the reset button for 5 seconds.
4. The washer will beep and the display will reset.
5. Turn on the washer and select the desired cycle.

Troubleshooting Common Problems

If your Maytag commercial washer is not working properly, you may need to troubleshoot the problem before resetting it. Here are some tips on troubleshooting common problems:

  • The washer is not turning on: Check to make sure that the power cord is plugged in and that the circuit breaker is not tripped.
  • The washer is not filling with water: Check to make sure that the water supply is turned on and that the hoses are not kinked or blocked.
  • The washer is not draining: Check to make sure that the drain hose is not kinked or blocked.
  • The washer is not spinning: Check to make sure that the belt is not broken or loose.

If you are unable to troubleshoot the problem yourself, you may need to call a qualified technician.

Step Instructions Image
1 Turn off the washer and unplug it from the outlet.
2 Locate the reset button on the back of the washer.
3 Press and hold the reset button for 5 seconds.
4 Plug the washer back in and turn it on.

How to Reset the Maytag Commercial Washer

Step 1: Turn off the washer.

To reset the Maytag commercial washer, you will first need to turn it off. To do this, locate the power switch on the front of the washer and turn it to the “Off” position.

Step 2: Unplug the washer from the wall outlet.

Once the washer is turned off, you will need to unplug it from the wall outlet. This will disconnect the washer from power and allow you to reset it.

Step 3: Locate the reset button on the washer.

The reset button on the Maytag commercial washer is located on the back of the washer, near the top. It is a small, round button that is usually black or gray in color.

Step 4: Press and hold the reset button for 5 seconds.

Once you have located the reset button, press and hold it for 5 seconds. This will reset the washer and clear any errors that may be present.

Step 5: Plug the washer back into the wall outlet.

After you have reset the washer, you will need to plug it back into the wall outlet. This will restore power to the washer and allow you to use it again.

Step 6: Turn on the washer.

Once the washer is plugged in, you can turn it on. To do this, locate the power switch on the front of the washer and turn it to the “On” position.

The washer will now be reset and ready to use.

What to Do If the Reset Button Does Not Work

If the reset button on the Maytag commercial washer does not work, there are a few things you can check.

Check to make sure that the washer is plugged in correctly.

The first thing you should check is to make sure that the washer is plugged in correctly. If the washer is not plugged in, it will not be able to reset.

Check to make sure that the reset button is not stuck.

The reset button on the Maytag commercial washer is a small, round button. It is possible for this button to become stuck. If the reset button is stuck, you will not be able to press it and reset the washer.

To check if the reset button is stuck, try pressing it. If the button does not move, it is likely stuck. You can try to unstick the button by using a small, flat object, such as a screwdriver or a butter knife.

Try resetting the washer again.

If the reset button is not stuck and the washer is plugged in correctly, you can try resetting the washer again. To do this, follow the steps above.

If the reset button still does not work, contact a Maytag authorized service center.

If you have tried resetting the washer and the reset button still does not work, you should contact a Maytag authorized service center. A technician can diagnose the problem and repair the washer.

Resetting the Maytag commercial washer is a simple process. By following the steps above, you can easily reset the washer and restore it to normal operation. However, if the reset button does not work, you should contact a Maytag authorized service center for assistance.

How To Reset Maytag Commercial Washer?

Step 1: Turn off the washer

The first step is to turn off the washer. This can be done by pressing the power button on the control panel.

Step 2: Unplug the washer

The next step is to unplug the washer from the wall outlet. This will ensure that the washer is completely powered off.

Step 3: Press and hold the reset button

Once the washer is unplugged, you can press and hold the reset button. This button is typically located on the back of the washer. You will need to hold the button down for about 5 seconds.

Step 4: Plug the washer back in

Once you have held the reset button down for 5 seconds, you can plug the washer back into the wall outlet.

Step 5: Turn on the washer

The final step is to turn on the washer. This can be done by pressing the power button on the control panel.

Once you have completed these steps, the washer should be reset. You can now try running a load of laundry.

Common Causes of Maytag Commercial Washer Problems

There are a number of common causes of Maytag commercial washer problems. These include:

  • Dirty lint filter
  • Clogged drain hose
  • Faulty water inlet valve
  • Faulty control board

Dirty lint filter

The lint filter is located at the bottom of the washing machine. It catches lint and other debris from the clothes as they are washed. If the lint filter is not cleaned regularly, it can become clogged and prevent the washer from draining properly. This can lead to a number of problems, including:

  • The washer will not drain properly.
  • The washer will make a loud noise when it is draining.
  • The washer may overflow.

To clean the lint filter, remove it from the washing machine and rinse it under warm water. Be sure to dry the lint filter completely before reinstalling it.

Clogged drain hose

The drain hose is located at the bottom of the washing machine. It connects the washer to the drainpipe. If the drain hose is clogged, it can prevent the washer from draining properly. This can lead to the same problems as a dirty lint filter.

To check the drain hose for clogs, remove the hose from the drainpipe and inspect it for debris. If you find any debris, remove it and reinstall the hose.

Faulty water inlet valve

The water inlet valve is located at the back of the washing machine. It supplies water to the washer. If the water inlet valve is faulty, it can prevent the washer from filling with water. This can lead to a number of problems, including:

  • The washer will not fill with water.
  • The washer will make a loud noise when it is filling with water.
  • The washer may overflow.

To check the water inlet valve for problems, turn off the water supply to the washer and remove the hose from the valve. Inspect the valve for leaks or damage. If you find any problems, replace the valve.

Faulty control board

The control board is the brains of the washing machine. It controls all of the functions of the washer. If the control board is faulty, it can cause a number of problems, including:

  • The washer will not turn on.
  • The washer will not start a cycle.
  • The washer will not stop a cycle.
  • The washer will not drain.

To check the control board for problems, you will need to contact a qualified technician.

How to Prevent Maytag Commercial Washer Problems

There are a number of things you can do to prevent Maytag commercial washer problems. These include:

  • Clean the lint filter regularly.
  • Check the drain hose for clogs regularly.
  • Replace the water inlet valve if it is faulty.
  • Replace the control board if it is faulty.

By following these tips, you can help to keep your Maytag commercial washer running smoothly and efficiently.

Resetting a Maytag commercial washer is a simple process that can be completed in a few minutes. If you are experiencing problems with your washer, resetting it may be the solution. However, if you are still experiencing problems after resetting the washer, you may need to contact a qualified technician.

How do I reset my Maytag commercial washer?

1. Turn off the washer and unplug it from the power outlet.
2. Locate the reset button on the washer. It is typically located near the control panel.
3. Press and hold the reset button for 5 seconds.
4. Plug the washer back in and turn it on.
5. The washer will now be reset.

What happens when I reset my Maytag commercial washer?

When you reset your Maytag commercial washer, it will erase all of the settings that you have previously set. This includes the water temperature, cycle time, and spin speed. You will need to re-enter these settings after the washer has been reset.

Why do I need to reset my Maytag commercial washer?

There are a few reasons why you might need to reset your Maytag commercial washer.

  • If the washer is not working properly. For example, if the washer is not spinning or draining, you may need to reset it to try to fix the problem.
  • If you have changed the settings on the washer. If you have changed the water temperature, cycle time, or spin speed, you will need to reset the washer so that the new settings will be saved.
  • If you have unplugged the washer. If you have unplugged the washer, you will need to reset it so that it will remember the settings that you have previously set.

**What should I do if my Maytag commercial washer still isn’t working after I reset it?

If your Maytag commercial washer is still not working after you have reset it, you may need to contact a qualified technician for help.

resetting a Maytag commercial washer is a relatively simple process that can be completed in a few minutes. By following the steps outlined in this guide, you can quickly and easily restore your washer to its normal operating condition.

Here are the key takeaways from this article:

  • To reset a Maytag commercial washer, turn off the power to the unit and unplug it from the wall outlet.
  • Press and hold the Start/Pause button for 5 seconds.
  • The washer will beep and the display will show “rES”.
  • Release the Start/Pause button.
  • The washer will be reset and ready to use.

By following these steps, you can quickly and easily restore your Maytag commercial washer to its normal operating condition.

Author Profile

Design By Typing
Design By Typing
We’ve turned typing into an art form. We don’t just scratch the surface; we type through it, breaking the crust of the conventional and bringing to light the layers of knowledge beneath. Our words are our paint, our keyboards the canvas, and the result? A masterpiece of information that’s as accurate as it is compelling.

We’re a band of inquisitive souls, data detectives, and prose pros. We’re not your average joe with a search engine. We dig deeper, leap further, and stay up way too late for the sake of quenching the knowledge thirst. Our team is a motley crew of expert researchers, savvy writers, and passionate nerds who believe that the right answer isn’t always the first one Google spits out.

Similar Posts