How To Take Apart A Lasko Tower Fan?

How to Take Apart a Lasko Tower Fan

Lasko tower fans are a popular choice for cooling down on hot summer days. They’re easy to use, and they can be placed in any room in your home. But what if your Lasko tower fan stops working? Or what if you want to clean it? In this article, we’ll show you how to take apart a Lasko tower fan so that you can troubleshoot any problems or give it a deep clean.

We’ll start by taking a look at the different parts of a Lasko tower fan. Then, we’ll walk you through the steps of taking it apart, step-by-step. Finally, we’ll give you some tips on how to put your fan back together again. So if you’re ready to learn how to take apart a Lasko tower fan, keep reading!

Step	Instructions	Image
1	Unplug the fan from the outlet.
2	Turn the fan upside down.
3	Locate the two screws on the bottom of the fan.
4	Use a Phillips head screwdriver to remove the screws.
5	Carefully separate the two halves of the fan.
6	Remove the fan blades.
7	Remove the motor assembly.
8	Clean the fan blades and motor assembly.
9	Reassemble the fan.
10	Plug the fan back into the outlet.

How to Take Apart a Lasko Tower Fan?

Gather Your Tools

Before you begin taking apart your fan, you will need to gather the following tools:

• Phillips head screwdriver
• Flathead screwdriver
• Needle-nose pliers
• Tape measure
• Safety glasses

Unplug the Fan

Before you can begin taking apart your fan, you must first unplug it from the wall outlet. This will prevent any accidental injuries.

Remove the Base Plate

The base plate of the fan is located at the bottom of the unit. To remove it, you will need to use a Phillips head screwdriver to unscrew the four screws that secure it to the fan. Once the screws are removed, you can lift the base plate off of the fan.

Remove the Motor Housing

The motor housing is located behind the base plate. To remove it, you will need to use a Phillips head screwdriver to unscrew the four screws that secure it to the fan. Once the screws are removed, you can lift the motor housing off of the fan.

Disconnect the Motor Wires

The motor wires are located at the back of the motor housing. To disconnect them, you will need to use a flathead screwdriver to pry up the small plastic tab that is holding them in place. Once the tab is pried up, you can disconnect the wires by pulling them gently away from the motor.

Remove the Fan Blades

The fan blades are located at the top of the fan. To remove them, you will need to use a Phillips head screwdriver to unscrew the four screws that secure them to the fan. Once the screws are removed, you can lift the fan blades off of the fan.

Remove the Fan Motor

The fan motor is located at the center of the fan. To remove it, you will need to use a Phillips head screwdriver to unscrew the four screws that secure it to the fan. Once the screws are removed, you can lift the fan motor out of the fan.

Reassemble the Fan

To reassemble the fan, simply reverse the steps that you took to take it apart. Be sure to tighten all of the screws securely.

By following these steps, you can easily take apart and reassemble your Lasko tower fan. This will allow you to clean the fan or make repairs as needed.

How To Take Apart A Lasko Tower Fan?

This guide will show you how to take apart a Lasko tower fan. This is a simple process that can be completed in a few minutes.

1. Unplug the Fan

Before you begin, make sure to unplug the fan from the power outlet. This will prevent any electrical shocks.

2. Remove the Front Panel

The front panel of the fan is held in place by two clips. To remove the front panel, press down on the clips and slide the panel off of the fan.

Removing the Front Panel on a Lasko Wind Tower Fan

To remove the front panel on a Lasko Wind Tower Fan, follow these steps:

1. Unplug the fan from the power outlet.
2. Locate the two clips on the front panel.
3. Press down on the clips and slide the panel off of the fan.

Removing the Front Panel on a Lasko Wind Curve Fan

To remove the front panel on a Lasko Wind Curve Fan, follow these steps:

1. Unplug the fan from the power outlet.
2. Locate the two clips on the front panel.
3. Press down on the clips and slide the panel off of the fan.

3. Remove the Base

The base of the fan is held in place by four screws. Use a Phillips head screwdriver to remove these screws. Once the screws are removed, the base can be lifted off of the fan.

4. Remove the Motor Housing

The motor housing is located at the top of the fan. It is held in place by four screws. Use a Phillips head screwdriver to remove these screws. Once the screws are removed, the motor housing can be lifted off of the fan.

5. Remove the Fan Blades

The fan blades are held in place by four clips. To remove the fan blades, press down on the clips and slide the blades off of the fan.

6. Clean the Fan

Once you have removed the fan blades, you can clean the fan. Use a damp cloth to wipe down the fan housing. Be sure to dry the fan completely before reassembling it.

7. Reassemble the Fan

To reassemble the fan, simply reverse the steps you took to take it apart. Be sure to tighten the screws securely.

This guide has shown you how to take apart a Lasko tower fan. This is a simple process that can be completed in a few minutes. By following these steps, you can easily clean and maintain your fan.

How do I take apart a Lasko tower fan?

1. Unplug the fan. This is a safety precaution to prevent you from getting shocked.
2. Turn the fan upside down. This will give you access to the screws that hold the fan together.
3. Remove the screws. There are usually four screws located on the bottom of the fan. Use a Phillips head screwdriver to remove them.
4. Separate the fan into two pieces. The top and bottom of the fan should now be able to be separated.
5. Remove the fan blades. There are usually two fan blades located on the top of the fan. Use a flathead screwdriver to pry them off.
6. Clean the fan. Use a dry cloth to wipe down the inside and outside of the fan. You can also use a mild detergent if needed.
7. Reassemble the fan. Reverse the steps above to reassemble the fan. Make sure that the screws are tightened securely.
8. Plug in the fan and test it. The fan should now be working properly.

What tools do I need to take apart a Lasko tower fan?

You will need a Phillips head screwdriver and a flathead screwdriver to take apart a Lasko tower fan.

What are the risks of taking apart a Lasko tower fan?

There are a few risks associated with taking apart a Lasko tower fan. First, you could get shocked if you don’t unplug the fan before you start working on it. Second, you could damage the fan if you’re not careful. Third, you could lose small parts if you’re not careful.

How long does it take to take apart a Lasko tower fan?

It should take about 10 minutes to take apart a Lasko tower fan.

Can I take apart a Lasko tower fan if it’s still plugged in?

No, you should never take apart a Lasko tower fan if it’s still plugged in. This is a safety hazard and could result in you getting shocked.

What if I lose a screw when I’m taking apart my Lasko tower fan?

If you lose a screw when you’re taking apart your Lasko tower fan, you can replace it with a similar-sized screw. Make sure that the screw is the same length and thread as the original screw.

taking apart a Lasko tower fan is a relatively simple process that can be completed in a few minutes. By following the steps outlined in this guide, you can easily access the fan’s internal components for cleaning or repairs. However, it is important to note that you should only attempt to take apart your fan if you are comfortable working with electrical components. If you are not confident in your abilities, it is best to consult a qualified technician.