How To Take Apart Ps4 Controller?

How to Take Apart a PS4 Controller

Your PS4 controller is an essential part of your gaming experience. But what happens when it starts to malfunction? Or worse, when it breaks completely?

If you’re not comfortable taking your controller to a professional, you may be wondering how to take it apart and fix it yourself. Fortunately, it’s a relatively simple process. In this article, we’ll walk you through the steps of taking apart a PS4 controller, so you can get back to gaming in no time.

We’ll start by providing a brief overview of the process. Then, we’ll go into more detail on each step, with images to help you along the way. By the end of this article, you’ll know everything you need to know about taking apart a PS4 controller.

Step Instructions Image
1 Turn off the PS4 controller and disconnect it from the console.
2 Use a Phillips head screwdriver to remove the four screws on the back of the controller.
3 Peel back the rubber grips on the back of the controller.
4 Disconnect the ribbon cable from the motherboard.
5 Carefully remove the two plastic covers on the sides of the controller.
6 Remove the four screws that hold the motherboard in place.
7 Lift up the motherboard and disconnect the battery connector.
8 The controller is now disassembled.

The PlayStation 4 controller is a popular gaming peripheral, but it can also be a bit of a pain to take apart. If you’re looking to clean your controller or replace a broken part, it’s helpful to know how to do it properly.

This guide will walk you through the process of taking apart a PS4 controller, step by step. We’ll cover everything you need to know, from the tools you’ll need to the order in which to remove the parts.

By the end of this guide, you’ll be able to take apart and reassemble your PS4 controller with ease.

Tools and Materials

The following tools and materials are required to take apart a PS4 controller:

  • Phillips head screwdriver
  • Torx T8 screwdriver
  • Tweezers
  • Soft cloth

Steps

1. Turn off the controller and disconnect it from your PlayStation 4.

2. Flip the controller over and locate the four Phillips head screws on the back.

3. Use the Phillips head screwdriver to remove the screws.

4. Carefully pry open the back cover of the controller.

5. There are two ribbon cables connected to the motherboard.

6. Use the tweezers to disconnect the ribbon cables.

7. Remove the back cover of the controller.

8. Locate the four Torx T8 screws on the motherboard.

9. Use the Torx T8 screwdriver to remove the screws.

10. Carefully lift up the motherboard and remove it from the controller.

11. The motherboard is now removed from the controller.

12. You can now clean the controller or replace any broken parts.

13. To reassemble the controller, follow the steps above in reverse order.

Taking apart a PS4 controller is a relatively simple process, but it’s important to follow the steps carefully to avoid damaging the controller. By following this guide, you’ll be able to take apart and reassemble your PS4 controller with ease.

How To Take Apart Ps4 Controller?

Turn off the PS4 controller and disconnect it from the console.

Before you can take apart your PS4 controller, you need to turn it off and disconnect it from the console. To do this, follow these steps:

1. Press and hold the PlayStation button on the controller.
2. Select **Power** > Turn Off PS4.
3. Once the controller is turned off, disconnect it from the console by unplugging the USB cable.

Remove the screws on the back of the controller.

To remove the screws on the back of the controller, you will need a Phillips head screwdriver. Follow these steps:

1. Flip the controller over so that the back is facing you.
2. Locate the four screws on the back of the controller.
3. Use the Phillips head screwdriver to unscrew the four screws.

Once you have unscrewed the four screws, you can remove the back cover of the controller.

Disconnect the ribbon cable.

Once you have removed the back cover of the controller, you will see a ribbon cable connecting the motherboard to the touchpad. To disconnect the ribbon cable, follow these steps:

1. Use a spudger or other thin tool to gently pry up the connector on the ribbon cable.
2. Carefully disconnect the ribbon cable from the motherboard.

Remove the motherboard.

To remove the motherboard, follow these steps:

1. Use a spudger or other thin tool to gently pry up the motherboard from the chassis.
2. Carefully disconnect the remaining cables from the motherboard.
3. Remove the motherboard from the chassis.

Remove the buttons and thumbsticks.

To remove the buttons and thumbsticks, follow these steps:

1. Use a spudger or other thin tool to gently pry up the buttons and thumbsticks.
2. Carefully disconnect the buttons and thumbsticks from the motherboard.
3. Remove the buttons and thumbsticks from the controller.

Replace the parts.

To replace the parts in your PS4 controller, follow these steps in reverse order.

1. Place the new parts in the controller.
2. Reconnect the cables to the motherboard.
3. Secure the motherboard to the chassis.
4. Reconnect the ribbon cable to the touchpad.
5. Replace the back cover of the controller.
6. Screw the four screws into place.

.

By following these steps, you can easily take apart your PS4 controller and replace any damaged or broken parts.

How to Take Apart a PS4 Controller?

Q: What tools do I need?

A: You will need the following tools:

  • Phillips head screwdriver
  • Torx T8 screwdriver
  • Tweezers

Q: How do I open the controller?

A: 1. Start by turning the controller upside down.
2. Locate the small screw on the back of the controller, just below the L2 button.
3. Use the Phillips head screwdriver to unscrew the screw.
4. Use the tweezers to pry open the back cover of the controller.
5. Be careful not to damage the ribbon cables inside the controller.

Q: What parts can I replace?

A: You can replace the following parts on a PS4 controller:

  • The thumbsticks
  • The buttons
  • The D-pad
  • The analog sticks
  • The battery

Q: How do I put the controller back together?

1. Align the back cover of the controller with the front of the controller.
2. Press down on the back cover until it snaps into place.
3. Replace the screw in the back of the controller.

Q: What are some common problems with PS4 controllers?

A: Some common problems with PS4 controllers include:

  • The thumbsticks drifting
  • The buttons not working
  • The D-pad not working
  • The analog sticks not working
  • The battery not charging

Q: How can I fix these problems?

A: You can fix these problems by following these steps:

  • For drifting thumbsticks, try cleaning the thumbsticks with a cotton swab. If that doesn’t work, you can try replacing the thumbsticks.
  • For buttons that are not working, try cleaning the buttons with a cotton swab. If that doesn’t work, you can try replacing the buttons.
  • For a D-pad that is not working, try cleaning the D-pad with a cotton swab. If that doesn’t work, you can try replacing the D-pad.
  • For analog sticks that are not working, try cleaning the analog sticks with a cotton swab. If that doesn’t work, you can try replacing the analog sticks.
  • For a battery that is not charging, try cleaning the battery contacts with a cotton swab. If that doesn’t work, you can try replacing the battery.

    In this tutorial, you learned how to take apart a PS4 controller. You started by removing the screws on the back of the controller. Then, you used a pry tool to open the controller and disconnect the ribbon cables. Finally, you removed the front and back panels of the controller.

Here are the key takeaways from this tutorial:

  • To take apart a PS4 controller, you need a Phillips head screwdriver and a pry tool.
  • The screws on the back of the controller are hidden under rubber caps.
  • You can disconnect the ribbon cables by carefully prying them up with a pry tool.
  • The front and back panels of the controller are held in place by clips.

By following these steps, you can safely and easily take apart your PS4 controller for repairs or modifications.

Author Profile

Design By Typing
Design By Typing
We’ve turned typing into an art form. We don’t just scratch the surface; we type through it, breaking the crust of the conventional and bringing to light the layers of knowledge beneath. Our words are our paint, our keyboards the canvas, and the result? A masterpiece of information that’s as accurate as it is compelling.

We’re a band of inquisitive souls, data detectives, and prose pros. We’re not your average joe with a search engine. We dig deeper, leap further, and stay up way too late for the sake of quenching the knowledge thirst. Our team is a motley crew of expert researchers, savvy writers, and passionate nerds who believe that the right answer isn’t always the first one Google spits out.

Similar Posts