How To Replace Moen 1225 Cartridge?

Moen 1225 Cartridge Replacement: A Step-by-Step Guide

Your Moen 1225 cartridge is a critical part of your faucet, and it’s important to know how to replace it if it ever fails. This guide will walk you through the process, step-by-step, so you can get your faucet up and running again in no time.

We’ll cover everything you need to know, from identifying the cartridge to removing the old one and installing the new one. So whether you’re a DIY novice or a seasoned pro, read on for all the information you need to know about Moen 1225 cartridge replacement.

Step	Instructions	Image
1	Turn off the water supply to the faucet.
2	Remove the handle by unscrewing the setscrews.
3	Remove the old cartridge by turning it counterclockwise.
4	Insert the new cartridge into the faucet body.
5	Replace the handle and tighten the setscrews.
6	Turn on the water supply to the faucet.

How to Replace a Moen 1225 Cartridge

This guide will show you how to replace a Moen 1225 cartridge in your faucet. The 1225 cartridge is a common type of cartridge used in Moen faucets, and it’s relatively easy to replace.

Tools and Materials Needed

• Replacement Moen 1225 cartridge
• Adjustable wrench
• Penetrating oil
• Rag
• Screwdriver

Step-by-Step Instructions

1. Turn off the water supply to the faucet.
2. Locate the cartridge housing under the faucet handle. It’s usually a round or rectangular-shaped cover with a screw in the center.
3. Remove the screw from the cartridge housing.
4. Use the adjustable wrench to grip the cartridge and turn it counterclockwise until it comes loose.
5. Remove the old cartridge from the housing.
6. Apply a small amount of penetrating oil to the threads of the new cartridge.
7. Insert the new cartridge into the housing and turn it clockwise until it’s snug.
8. Replace the screw in the cartridge housing.
9. Turn on the water supply to the faucet.

Replacing a Moen 1225 cartridge is a relatively simple task that can be completed in a few minutes. By following these steps, you can keep your faucet running smoothly and efficiently.

Additional Tips

• If the cartridge is stuck, you can try using a heat gun or hair dryer to warm it up. This will help loosen the seal and make it easier to remove.
• Be careful not to damage the threads of the cartridge housing when you’re removing or installing the cartridge.
• If you’re not sure how to replace the cartridge, you can always call a plumber for help.

Frequently Asked Questions

Q: What is a Moen 1225 cartridge?

A: A Moen 1225 cartridge is a type of cartridge used in Moen faucets. It’s a cylindrical-shaped piece of plastic that contains the water shut-off valves and other components.

Q: How do I know if I need to replace my Moen 1225 cartridge?

There are a few signs that indicate that you may need to replace your Moen 1225 cartridge. These include:

• The faucet is dripping even when it’s turned off.
• The faucet is not turning on or off properly.
• The water pressure is low.
• The faucet is making a strange noise.

Q: How long does it take to replace a Moen 1225 cartridge?

Replacing a Moen 1225 cartridge typically takes about 10 minutes.

Q: How much does it cost to replace a Moen 1225 cartridge?

The cost of replacing a Moen 1225 cartridge varies depending on the location and the plumber you hire. However, you can expect to pay between $20 and $50 for the replacement cartridge and labor.

Resources

• [Moen 1225 Cartridge Replacement Instructions](https://www.moen.com/customer-support/how-to-guides/faucet-cartridge-replacement/1225-cartridge-replacement)

How To Replace Moen 1225 Cartridge?

1. Gather your tools and materials

Before you begin, gather the following tools and materials:

• Replacement Moen 1225 cartridge
• Adjustable wrench
• Penetrating oil
• Rag
• Bucket

2. Shut off the water supply

The first step is to shut off the water supply to the faucet. This will prevent any water from escaping when you remove the cartridge. To do this, locate the shut-off valve under the sink. It is usually a small, round valve with a handle. Turn the handle clockwise to shut off the water.

3. Remove the old cartridge

Now that the water is turned off, you can remove the old cartridge. To do this, you will need to use an adjustable wrench.

1. Locate the cartridge housing under the sink. It is a cylindrical-shaped object with a slot in the top.
2. Insert the jaws of the adjustable wrench into the slot in the cartridge housing.
3. Turn the wrench clockwise to loosen the cartridge.
4. Once the cartridge is loose, you can pull it out of the housing.

4. Clean the cartridge housing

Before you install the new cartridge, you will need to clean the cartridge housing. This will help to ensure that the new cartridge seals properly. To do this, use a rag and some penetrating oil to clean the inside of the housing.

5. Install the new cartridge

Now that the cartridge housing is clean, you can install the new cartridge. To do this, simply reverse the steps you took to remove the old cartridge.

1. Insert the new cartridge into the housing.
2. Use the adjustable wrench to tighten the cartridge.
3. Turn the water supply back on.

6. Troubleshooting

If you are having trouble installing the new cartridge, there are a few things you can check.

• Make sure that the cartridge is the correct size for your faucet.
• Make sure that the cartridge is installed correctly. The arrow on the cartridge should be pointing in the direction of the water flow.
• If the cartridge is still leaking, you may need to replace the O-rings.

7. Additional tips

Here are a few additional tips for replacing a Moen 1225 cartridge:

• If you are not comfortable working with plumbing, you may want to hire a professional to replace the cartridge for you.
• Be careful not to drop the cartridge into the sink. If you do, you can usually retrieve it with a magnet.
• Make sure to turn off the water supply before you start work.
• When you are finished, turn the water supply back on and test the faucet to make sure that it is working properly.

Replacing a Moen 1225 cartridge is a relatively simple task that can be completed in a few minutes. By following these steps, you can easily keep your faucet in good working order.

How To Replace Moen 1225 Cartridge?

Q: What tools do I need to replace a Moen 1225 cartridge?

A: You will need a screwdriver, a pair of pliers, and a new Moen 1225 cartridge.

Q: How do I remove the old cartridge?

A: 1. Turn off the water supply to the faucet.
2. Locate the cartridge housing under the faucet handle.
3. Use the screwdriver to remove the screws that hold the cartridge housing in place.
4. Use the pliers to grip the cartridge and pull it out of the housing.

Q: How do I install the new cartridge?

A: 1. Make sure that the new cartridge is the correct size for your faucet.
2. Apply a thin coat of plumber’s grease to the O-rings on the cartridge.
3. Insert the cartridge into the housing.
4. Secure the cartridge in place with the screws.
5. Turn on the water supply to the faucet.

Q: What are the common problems with Moen 1225 cartridges?

A: The most common problems with Moen 1225 cartridges are leaks and drips. These problems can be caused by a worn-out cartridge or a faulty O-ring.

Q: How can I prevent leaks and drips from my Moen 1225 cartridge?

A: You can prevent leaks and drips from your Moen 1225 cartridge by replacing the cartridge regularly and inspecting the O-rings for damage. You should also make sure that the cartridge is installed correctly.

Q: Where can I buy a Moen 1225 cartridge?

A: You can buy a Moen 1225 cartridge at most home improvement stores or online retailers.

In this blog post, we have discussed how to replace a Moen 1225 cartridge. We have provided a step-by-step guide, as well as some tips and tricks to make the process easier. We hope that this information has been helpful, and that you are now able to replace your Moen 1225 cartridge with confidence.

Here are some key takeaways from the blog post:

• The Moen 1225 cartridge is a common type of cartridge found in Moen faucets.
• Replacing the cartridge is a relatively simple process, but it is important to follow the steps carefully to avoid damaging the faucet.
• The tools you will need to replace the cartridge include a screwdriver, a pair of pliers, and a new cartridge.
• The steps to replace the cartridge are as follows:

1. Turn off the water supply to the faucet.
2. Remove the escutcheon plate.
3. Remove the old cartridge.
4. Install the new cartridge.
5. Turn the water supply back on.

We hope that this blog post has been helpful. If you have any questions, please do not hesitate to contact us.