How To Turn Chlorinator On Hayward Aqua Plus?

How to Turn Chlorinator On Hayward Aqua Plus

Your Hayward Aqua Plus chlorinator is an essential part of your pool’s sanitation system. It helps to keep the water clean and safe for swimming by adding chlorine to the water. But how do you turn it on?

In this article, we’ll walk you through the steps of turning on your Hayward Aqua Plus chlorinator. We’ll also provide some tips on how to maintain your chlorinator and keep it running properly.

So if you’re ready to learn how to turn on your Hayward Aqua Plus chlorinator, read on!

How To Turn Chlorinator On Hayward Aqua Plus?

| Step | Action | Result |
|—|—|—|
| 1. | Turn off the power to the pool pump. | |
| 2. | Locate the chlorinator on the pool equipment pad. | |
| 3. | Open the chlorinator lid. | |
| 4. | Find the “On/Off” switch and turn it to the “On” position. | The chlorinator will start to produce chlorine. |
| 5. | Close the chlorinator lid. | |
| 6. | Turn the power back on to the pool pump. | |

A Hayward Aqua Plus chlorinator is a device that automatically adds chlorine to your pool water to keep it clean and healthy. It is a safe and effective way to sanitize your pool, and it can help to prevent the growth of bacteria and algae.

This guide will show you how to turn on your Hayward Aqua Plus chlorinator. We will cover the following topics:

• Locating the chlorinator
• Turning on the chlorinator
• Adjusting the chlorine level

Locating the Chlorinator

The chlorinator is typically located on the side of the pool, near the pump. It is a cylindrical-shaped device with a series of knobs and buttons on the front. The chlorinator may be labeled as “Chlorinator” or “Chemical Feeder.”

If you cannot find the chlorinator, consult your pool owner’s manual.

Turning on the Chlorinator

To turn on the chlorinator, locate the power switch and turn it to the “On” position. The chlorinator will then begin to feed chlorine into the pool water.

The amount of chlorine that is fed into the pool water can be adjusted using the knobs and buttons on the front of the chlorinator.

Adjusting the Chlorine Level

The ideal chlorine level for your pool will vary depending on the size of your pool, the climate, and the amount of use. However, a good starting point is to set the chlorine level to 3 ppm.

You can test the chlorine level in your pool using a test kit. If the chlorine level is too low, you can increase it by turning the “Chlorine” knob on the chlorinator clockwise. If the chlorine level is too high, you can decrease it by turning the “Chlorine” knob counterclockwise.

By following these steps, you can easily turn on your Hayward Aqua Plus chlorinator and keep your pool clean and healthy.

Here are some additional tips for using your chlorinator:

• Clean the chlorinator regularly to prevent it from becoming clogged.
• Replace the chlorine tablets regularly.
• Test the chlorine level in your pool regularly and adjust it as needed.

By following these tips, you can ensure that your chlorinator is working properly and that your pool is clean and safe for swimming.

How do I turn on the chlorinator on my Hayward Aqua Plus pool pump?

1. Locate the chlorinator on your pool pump. It is a cylindrical tank with a clear lid, typically located near the top of the pump.
2. Turn the power switch to the “On” position. This will turn on the pump and the chlorinator.
3. Adjust the chlorine level to the desired setting. The chlorine level is typically set between 1 and 3 ppm.
4. Check the chlorinator every few days to make sure it is working properly. The chlorinator should be producing a steady stream of chlorine gas.

What happens if I don’t turn on the chlorinator?

If you don’t turn on the chlorinator, your pool water will not be properly sanitized. This can lead to the growth of bacteria and algae, which can make swimming in your pool unsafe.

What if the chlorinator is not working properly?

If the chlorinator is not working properly, your pool water will not be properly sanitized. This can lead to the growth of bacteria and algae, which can make swimming in your pool unsafe. There are a few things you can check to troubleshoot the problem:

• Make sure the power switch is turned on.
• Check the chlorine level to make sure it is set correctly.
• Clean the chlorinator to remove any debris that may be blocking the flow of chlorine gas.
• If the chlorinator is still not working properly, you may need to have it serviced or replaced.

**How often should I clean the chlorinator?

You should clean the chlorinator every few weeks to remove any debris that may be blocking the flow of chlorine gas. To clean the chlorinator, follow these steps:

1. Turn off the power to the pump and chlorinator.
2. Remove the clear lid from the chlorinator.
3. Use a soft brush to gently brush away any debris from the inside of the chlorinator.
4. Reattach the lid and turn on the power to the pump and chlorinator.

**What is the difference between a Hayward Aqua Plus chlorinator and a salt water chlorinator?

A Hayward Aqua Plus chlorinator uses a chemical process to produce chlorine gas, which is then used to sanitize the pool water. A salt water chlorinator, on the other hand, uses a salt water cell to produce chlorine gas. Salt water chlorinators are typically more expensive than Hayward Aqua Plus chlorinators, but they are also more efficient and require less maintenance.

In this blog post, we have discussed how to turn on the chlorinator on a Hayward Aqua Plus pool chlorinator. We have covered the steps in detail, as well as some troubleshooting tips. We hope that this information has been helpful to you. If you have any further questions, please do not hesitate to contact us.

Here are some key takeaways from this blog post:

• The Hayward Aqua Plus pool chlorinator is a popular choice for residential pools.
• To turn on the chlorinator, you will need to locate the power switch and turn it to the “on” position.
• You will also need to set the desired chlorine level.
• The chlorinator will automatically start producing chlorine once it is turned on.
• If you have any problems with your chlorinator, you can refer to the owner’s manual or contact Hayward customer service for assistance.